Data Storage and Interface Board

The Data Storage and Interface Board (DSIB), is designed to maximize the Q8J's advanced capabilities and extensive I/O. To meet the needs of demanding applications that handle large amounts of data from multiple sources, DSIB provides a wide range of high-speed and standard interfaces and extensive mass memory storage.

The Q8 OBC card offers the following key features:

SPEC SHEET Compare processors

STORAGE:

2 Terabytes of bulk storage
- 2x 1 Terabyte SSDs
- > 300 MB/s sustained write

INTERFACES:

4x GigE (1Gbps) ports with magnetics
2x CAN bus controllers (one controller capable of switching between two transceivers)
7x RS422 ports, 1x RS485
1x RS422/RS485 (full or half-duplex, factory-configured)
16x LVDS outputs
12x LVDS inputs
4x factory-configured LVDS I/Os

Power:

Input voltage: 9 to 13V (12V nominal)
12W typical with all interfaces active and 1 SSD

FORM FACTOR

90 mm x 190 mm x 25 mm, 260 g (DSIB + Q8J + mounting HW)

ENVIRONMENTAL:

Operating temperature: -40 to +60C

MASS DATA STORAGE

Offering two 1 TB SSD, the Q8J DSIB is equipped to store the large amounts generated by high-speed sensors. Not only that, but high-performance processors and extensive FPGA fabric allow for onboard processing of data streaming to and from SSDs.

Did you know

In addition to our standard daughterboards, we offer application-specific development integrating our powerful Q-Card processors with the interfacing options and application-specific electronics you require. Contact our team to learn more about customization.

Explore Custom Solutions

Other Products

Jepico-Synspective-OBC0B01-Q8-1-optimized

Q8 OBC

Offering high processing power and flexibility with low SWaP, Xiphos’ On-Board Computer (OBC) is designed to meet the needs of your most demanding SmallSat missions, giving you full control over all spacecraft subsystems. Based on the Xiphos Q8 processor board, it’s backed by 120+ years of flight heritage.

Subsystem control:. Serial: RS-422/485/232, CAN, and LVDS-based protocols, Gigabit Ethernet and USB 2.0
Satellite monitoring: -5V to +5V analog inputs, 0V to 5V analog inputs, PT2000 thermistor inputs for thermal monitoring
Form Factor: 167.3 mm x 182.6 mm x 91 mm
Weight: 957 g
Operation: Operating Temp. -40 to +60C, Power 7.5W nominal, 14W peak
Xiphos Radiation Robustness Suite

Learn More

Q8RF

This processor features the Xilinx Zynq® UltraScale+™ RFSoC and is the result of our relentless quest for evolution. It's at the forefront of our next-generation Q-Card Processors, bringing full SDR capabilities to the next level.

Memory: 4 GB of LPDDR4 RAM (with ECC), 4 GB DDR4 on PL, 2 x 25 MB QSPI Flash (NOR), 2x 32 GB NAND Flash
Xilinx ZU28DR RFSoC, which includes a dual-core ARM Cortex-A53 Application Processing Unit and a dual-core ARM Cortex-R5 Real-Time Processing Unit
Power: typical 6W (to 40W max) @ 5V to 16V

Learn More

FAQ

Are Xiphos products truly space-ready?

Absolutely. Xiphos has a rich history in creating Processor Boards designed explicitly for space applications using COTS components. Every element, from component selection to logic features, is designed to exceed your mission expectations. We've proven our capabilities in various missions and roles.

Where are Xiphos products typically deployed?

With the burgeoning New Space market, our products have found their place in numerous LEO applications, launchers, and even on the moon. We analyze your specific requirements and recommend the most suitable product to ensure mission success.

What tools are necessary to design my solution on Xiphos boards?

We provide a Linux Software Development Kit (SDK) based on industry-standard toolchains, enabling our customers to implement their designs on our boards rapidly. We also offer a Vivado skeleton project as a starting point, leaving over 90% of the FPGA resources available for your application.

Can Xiphos accommodate specific interface requirements for my mission?

Absolutely! We collaborate closely with our customers to cater to varied interface requirements. We either provide a ready solution or guide your team on how to implement it.

Does Xiphos offer technical support?

Yes, we do: Our technical support aims to assist with product understanding and overcoming initial learning curves. We also provide project-specific support packages, which can be utilized to develop custom software or logic, review your design, or even aid in designing your carrier board.

How does Xiphos quantify radiation exposure?

We quantify radiation exposure through testing of both Total Ionizing Dose (TID), which accumulates over time, and Single-Event Effects (SEE), which is more like a lightning strike. TID is a measure of the total amount of radiation that a device is expected to be exposed to over its mission life, while SEE is a measure of the effects of the individual "hits" of radiation that a device has experienced.

What is the architecture of the Xiphos COTS-based Processor Board that makes it useable Space?

The board has dual FPGA (processor and supervisor) and ECC for its memory banks. It also provides a suite of other radiation effects mitigation features. We also ensure that the selected components can survive the harsh radiation environment of space.

How does Xiphos handle the memory scrubbing of memory devices?

Xiphos provides memory scrubbing software that can be run in the background of the main application software to clear single-bit errors in memory.

What kind of design validation does Xiphos perform?

Xiphos conducts a radiation qualification test campaign, including board-level proton and TID (gamma ray) testing, as well as an environmental qualification that includes TVAC, vibration, and shock testing.

What documentation does Xiphos provide to customers?

We provide spec sheets, pinout files, user manuals, mechanical drawings, and 3D STEP files, some of which are provided under NDA.

Can you provide details about the different types of Xiphos Processor Boards?

The document lists various Processor Boards with their specifications, like the Q7, Q7AE, Q7RH, Q8, Q8J, Q8RF, and Q8RH.

What are the available Daughterboards for Q7 and Q8 processors?

For Q7, there's the Q7ACS and Q7 Camera Board. For Q8, there's the Q8 Camera Board, Q8 SDR Dock, and Q8 DHMMU.

What peripherals and interfaces are available in the Q7 Zynq 7020 MPSoC FPGA?

The Q7 MPSoC FPGA has multiple ‘hard core” peripherals, including 2x Gigabit Ethernet MAC, 2x USB 2.0, 2x CAN 2.0B, 2x SDIO, 2x SPI, 2x UART, 2x I2C, GPIO. For Q8, there's PCI Express 2.1, SATA 6Gbs rev 3.1, 4x Ethernet MAC rev 2.0, and 2x USB rev 2

What peripherals are available in the Q8 and Q8J Zynq UltraScale+ MPSoC FPGA?

The Q8 and Q8J MPSoC FPGAs have multiple ‘hard core” peripherals, including 4x Gigabit Ethernet MAC, 2x USB 3.0/2.0, 2x CAN 2.0B, 2x SDIO, 2x SPI, 2x UART, 2x I2C, GPIO, PCI Express (PCIe) Gen 2, and SATA 6Gbs Rev 3.1. The Q8J also provides access to the MPSOC’s 2x PCIe Gen 3 cores in the PL.

What are the main offerings of Xiphos?

Xiphos creates superior, high-performance, space-ready COTS-based Processor Boards and Daughterboards, leveraging the power of Xilinx MPSoC FPGAs.

What sort of advantages does Xiphos bring to the table?

Quite a lot!

Exceptional performance: Our products are built to deliver unparalleled performance in the most challenging applications.
Flight-proven resilience: Rigorous testing under the harshest conditions ensures the reliability of our products.
Tailored solutions: We offer customization to cater to your specific needs.
Comprehensive support: Our wide range of support options will ensure you get the maximum value out of our products.

What are the distinct product categories offered by Xiphos?

Processor Boards: The beating heart of our product line, our Processor Boards come packed with various features and options to cater to diverse applications.
Daughterboards: Our Daughterboards are compact and specialized, designed for particular applications such as SDR, imaging, or robotics.
Software: We provide a suite of software tools to aid you in developing and deploying various applications on our products.

How can I procure products from Xiphos?

Xiphos' products can be accessed through multiple channels, including this website, authorized distributors, and direct sales representatives.